State-of-The-Art Climate Simulation Equipment for Accurate Rapid Temperature Humidity Change Testing Device

Product Description

State-of-The-Art Climate Simulation Equipment for Accurate Rapid Temperature Humidity Change Testing Device

Product Description

Product features:
1. The humidity control function can be selected. The temperature rise and fall rate is adjustable. Maximum rate can reach 20ºC/Min, auxiliary liquid nitrogen refrigeration can reach 30ºC/Min; 
2. Equipped with a frequency converter, the wind speed can be adjusted. It can be set to reduce in a constant state. Wind speed; Optional dry air blowing system. Prevent condensation in the box and samples frost; 
3. Cold output energy-saving design, recognized by third-party testing institutions. In the major refrigeration department. Unified middle school. The energy-saving effect is very significant.

Model		MESS-280		MESS-500	MESS-1000	MESS-1500
Parameter	Temperature range	-40~+150ºC(-20+80ºC) - 70+150ºC(-55+80ºC)
	Temperature fluctuation	±0.3ºC±0.5ºC
	Temperature deviation	±
	Humidity deviation	±3%RH(<75%RH)±5%RH  (≤75%RH)
	Heating and cooling rate	5/10/15/20ºC/min
	Standard load (aluminum ingot)	5kg		12kg	25kg	30kg
Structure	Casing	High strength cold-rolled steel plate double-sided fine powder baking paint
	Inner wall	SUS # 304 Stainless Steel 2B Panel
	Thermal insulation material	Glass fiber+polyurethane foam
Cooling system	Cooling method	Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method
	refrigeration machine	Imported compressor
Heater		Strip heater
Observation window (mm)		300*400/400*600
Test hole (mm)		50 at left side			100 at right side
Temperature sensor		Platinum resistance pt100
Controller		Original Japanese imported 7-inch TFT touch screen
Recording device		Built in paperless recorder function (can be externally printed)
Interface		UCB interface connection operation
Inner size (cm)	Width	70		80	100	130
	Height	80		90	100	115
	Depth	50		70	100	100
Height of motor cover		19		21	22	21
Power		AC380V 50Hz Three-phase four-wire
Standard configuration		1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs
Meet the configuration requirements			GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0

Note:
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.

 

Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Explore our sophisticated range of German and Taiwan imported machinery, featuring the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding machines, each model exemplifies precision and innovation. Master multiple Autodesk Inventor 3D drawing software applications for sheet metal design, virtual assembly, and disassembly, redefining modern manufacturing excellence.
2. Constructed from premium galvanized steel, the shell offers remarkable durability, further enhanced with an advanced electrostatic powder spray baking paint finish. This ensures enduring protection and a refined aesthetic appeal.
Three.. Meticulously crafted with imported SUS #304 stainless steel, the inner box employs a full argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded corners promote efficient condensate drainage, optimizing performance.

Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration system management, featuring cutting-edge frequency conversion control technology, provides precise and flexible thermal regulation, ensuring unparalleled adaptability.
Within our variable frequency refrigeration system, even with a consistent power supply frequency of 50HZ, the frequency converter intelligently adjusts compression speed. It tailors cooling output to real-time test chamber loads, dynamically adjusting compressor frequency as chamber temperatures fluctuate, enhancing energy efficiency and ensuring rapid cooling for exceptional performance.
Experience impeccable stability with our test chamber's variable frequency refrigeration system, maintaining a consistent temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, optimizing operational consistency for top-tier performance.

Benefit from energy-efficient refrigeration system technology combined with cutting-edge energy-saving innovations, designed to maximize performance while minimizing resource consumption.
1. Utilize the power of PID and PWM-driven VRF technology, employing electronic expansion valves for optimal thermal flow control. Achieve low-temperature energy efficiency with PID + PWM systems enhancing refrigerant flow regulation, ensuring effective operation without auxiliary heating.
With precise three-way flow adjustment of refrigeration, cold side, and heating side pipelines, achieve automatic temperature constancy. This method excels in maintaining optimal performance under low-temperature conditions, reducing energy consumption by 30% and optimizing overall efficiency.
Our technology, leveraging the Danish Dan-foss Company's ETS System electronic expansion valve, provides dynamic refrigeration capacity adjustments. It adapts to diverse cooling rates, optimizing compressor cooling capacity for superior efficiency.
2. Employing a dual compressor group design technology, automatic start-stop functionality aligns with load conditions to optimize efficiency, facilitated by our advanced series design.
The refrigeration unit features a binary compound of semi-closed compressors and a fully dense single-stage system. It intelligently adapts to load requirements, ensuring optimal cooling capacity and extending compressor longevity.

Innovative Cold Circuit Technology
Power distribution layout is expertly executed according to technical department blueprints, utilizing globally recognized electrical component brands for unsurpassed reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate time-honored brands like Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for ease of use and reliability. We select only the most reputable Chinese brands to ensure top-notch performance and durability.
Choose the prestigious Pearl River Cable as our esteemed brand, promising unrivaled wire quality and outstanding performance. Our control lines feature a minimum specification of 0.75 Square RV soft copper wire, ensuring strong and effective conductivity. Key load components, such as motor compressors, are meticulously engineered to meet the exacting EC standards. Trap diameters are precisely selected to comply with cable groove wiring safety current standards. The machine's cable port is expertly sealed, preventing frost-induced short circuits, thereby safeguarding the terminal within the junction box from any potential harm.
Every terminal fixing screw is meticulously connected with a standard fixed torque, guaranteeing secure and rapid connections while mitigating risks like loose fires. This meticulous attention to detail significantly elevates the safety and reliability of our systems.

Refrigeration Series Process: An All-Encompassing and Comprehensive Approach
1. Standardization: Charting the Course to Unmatched Excellence
1.1 Our distinguished steel pipe piping process, in conjunction with rigorous welding standards, highlights our steadfast commitment to excellence and unrivaled reliability.
By consistently following standard pipe layouts, we ensure the unwavering stability and dependable reliability of our model systems.
1.2 Utilizing advanced Italian imported pipe bending machinery, we craft seamless steel pipe bends. This state-of-the-art process significantly reduces the need for welding points and minimizes oxide generation within the tubes during welding, thereby enhancing overall system reliability.
Placing System Reliability at the Forefront

Innovative Shockproof Design and Long-Lasting Pipeline Support
2.1 At MENTEK, we implement stringent standards for the support and shock prevention of refrigeration copper pipes. By thoroughly evaluating potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping to protect against deformation and leakage caused by circular vibration and temperature fluctuations, thereby boosting the overall reliability of the refrigeration system.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Advanced Oxidation-Free Welding Process
It is well established that the cleanliness of a refrigeration system's pipeline is vital to its efficiency and longevity. MENTEK employs a standardized charging welding procedure to prevent excessive oxide contamination during the welding process, thereby ensuring peak performance.
Through diligent practices, MENTEK boosts the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide pollution during welding, thus maximizing reliability and performance.

 

Company Profile

Certifications

Ship to Client's Factory

 

 

Our Partners

Packaging & Shipping