Rapid Temperature Control Chamber for Accurate Environmental Heat Testing Equipment
Product Description
Embark on a journey of precision and groundbreaking innovation with the Guangdong Humid Testing Chamber, the zenith of environmental simulation technology, meticulously crafted to perfection. This remarkable chamber offers unparalleled versatility and precision, executing both high and low-temperature tests with exceptional accuracy across a diverse spectrum of electrical components, products, parts, and materials. With testing capabilities that encompass constant, gradient, and rapid temperature fluctuations, as well as wet heat assessments, the MENTEK chamber does not merely comply with Chinese national standards T10586-2006 and T10592-2008-it sets a new benchmark by surpassing them. It establishes itself as the industry leader for reliability and exceptional performance in climate simulation technology, making it the ultimate partner for achieving testing excellence.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are expertly engineered to precisely meet specific heating and cooling rate requirements, ensuring optimal efficiency and adaptability for a wide range of applications.
2. For water-cooled models: the water temperature range is meticulously designed to span from 10~28 ºC, accompanied by a water pressure range of 0.1~0.3Mpa, offering unmatched cooling performance and robustness.
3. Enhance your testing conditions with an advanced functionality option, featuring an additional dampness and heat capability, which elevates every test to new heights of precision.
4. Enjoy remarkable adaptability with an optional dry air blowing system, precisely engineered to fulfill your unique testing requirements with exceptional precision.
5. Amplify rapid cooling efficiency with an optional liquid nitrogen feature, boasting the capacity to achieve a cooling rate of 30 ºC/min, ensuring swift and effective outcomes.
6. Standard configurations are customizable to meet specific customer requirements, offering bespoke solutions tailored to every need.
The equipment meets the following testing standards
Our cutting-edge testing equipment consistently adheres to an extensive array of rigorous standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Furthermore, it complies with the China National Standard/T2423.34-2012 Test Z/AnnoDominique. This thorough compliance ensures our equipment excels across a multitude of temperature and humidity scenarios, delivering reliability and precision that remain unmatched within its expansive performance capabilities.
Structure of the testing chamber
The testing chamber's robust structure is crafted with an outer shell made from premium, galvanized color steel plate, specifically designed to provide exceptional durability and protection against environmental elements, ensuring longevity and steadfast performance for years to come.
Internally, the chambers are constructed with SUS304 stainless steel plates, featuring adaptable hanging hole strips for versatile configurations. Each chamber is designed with a thoughtful layout, incorporating a test track frame, insulated with an impressive 10 cm layer of rigid polyurethane foam and glass wool. High-quality electric wood chicken glass fiber board frames securely link the inner and outer box doors, delivering superior low-temperature insulation. The silicone foam door sealing strip is ingeniously designed with dual channels, boasting remarkable temperature resistance to ensure optimal performance and energy efficiency.
Experimental space air circulation:
Equipped with an advanced air supply system, the chamber utilizes high and low-temperature resistant multi-blade aluminum wind turbines driven by powerful motors. These state-of-the-art turbines expertly circulate air through upper louvers and return it from the bottom, maintaining temperature uniformity of less than 2 ºC across an impressive range of -70~100 ºC. This system is rigorously evaluated at an international standard of 10 points, ensuring consistency and precision in every test conducted.
Controller operating system
Integrated with a cutting-edge, low-power (8W) temperature and humidity control device, the system offers unparalleled accuracy with a temperature control precision of ±3 ºC, setting a new benchmark in control technology and ensuring superior performance in every operation.
1. High resolution screen:
Immerse yourself in the exceptional clarity and vibrancy of our cutting-edge 7-inch TET true-color LCD resistive touch screen. With an impressive resolution reaching up to 800 * 480, every detail bursts with vivid precision, ensuring seamless navigation and effortless operation.
2. Expansive Program Capacity:
Elevate your testing potential with our groundbreaking memory capacity, designed to accommodate an impressive 1000 programs, each offering 1000 segments. Harness the power of 999 total loops, 999 partial loops, and 10 program linking options. Enjoy instantaneous real-time temperature curve displays that simplify queries and expand your analytical possibilities.
3. Robust Data Storage Capacity:
Seamlessly transfer extensive historical data spanning up to 300 days with ease. Opt for direct upload via a hard disk or network cable to your computer, or load data into the controller for uninterrupted access. This streamlined process enhances convenience and maximizes operational efficiency.
4. Effortless Connectivity:
Unlock unparalleled control with our state-of-the-art controller, featuring LAN standard Ethernet communication. Effortlessly manage up to 16 devices through a single software platform. The outflow interface ensures seamless network integration, enabling remote program management, real-time monitoring, and swift historical data access, delivering peak convenience in control and data management.
Precision Heating and Moisture Control System
Explore the future of temperature precision with our advanced bare wire nickel-chromium alloy electric heating tubes. Engineered for low thermal inertia and minimal overshoot, they ensure unparalleled accuracy in temperature control. Coupled with sophisticated power management, this system guarantees exceptional performance for all your testing needs.
1. Innovative Humidification System:
Transform your testing capabilities with our cutting-edge humidification technology. A state-of-the-art humidification cylinder employing the effective boiler method ensures optimal moisture uniformity. Our water plate surface humidification offers rapid, accurate control, efficiently eliminating impurities like scale. Ideal for low humidity dyeing conditions, with effortless maintenance. The humidification tube, crafted from seamless stainless steel, boasts insulation resistance over 50M Ω and includes a robust anti-dry burning controller for enhanced safety.
2. Maximized Water Efficiency and Energy Conservation:
Discover the convenience of our front-mounted 25L capacity water tank, designed with a quick-connect system for efficient management of water and power. Easy disassembly and cleaning ensure precision maintenance. Achieve precise dehumidification across three distinct humidity zones, adhering to rigorous national standards for high temperature and humidity at 85 º C and 85% RH. Our innovative sealed design, which deactivates point cooling and dehumidification systems, significantly reduces water consumption, ushering in a new era of sustainable operation.
Opt for our equipment, meticulously engineered to excel in the most demanding testing environments, offering unparalleled reliability and outstanding performance.
1. Choose the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution ensures precision and adaptability, consistently delivering optimal performance.
2. Superior Water Supply System: RO Reverse Osmosis
When precision in humidification is paramount, our equipment guarantees a consistent flow of pure water via an automated production process, enhancing convenience and saving valuable time.
3. Advanced Polymer Film/Rotor Dehumidification System
For rigorous long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is the definitive solution. It expertly manages a broad humidity range, reaching down to 10 º C/10% RH or lower, upholding the highest standards.
4. LN.Two/ .LCO.2
We deliver premium professional products with a comprehensive array of specifications, sourced directly from prestigious manufacturers in Europe and the United States. LN.Two/ .LCO.2
Harness the full potential of our solenoid valves and cutting-edge control systems, designed to swiftly address urgent testing requirements. Experience unparalleled thermal acceleration and precision temperature modulation, meeting your most demanding testing needs with ease.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Our groundbreaking ultrasonic cooling and humidification system is expertly crafted to handle dynamic testing challenges with substantial heat loads combined with high temperatures and humidity. Utilize this innovative solution as a vital supplementary component, ensuring exceptional performance in your testing processes.
6. Integrate a Glass Inner Door for Manual Operation Access
Optimize operational efficiency and reduce environmental impact during frequent testing or object movement. Our intelligently designed glass inner door (∧ 125Mm * Ea.) allows for manual operations, minimizing disruptions from repeated door openings and maintaining high testing integrity.
7. Real-Time Test Data Collection and Recording
In precise and accuracy-demanding environments, our tape recorder reigns supreme. Engineered for simultaneous multi-temperature data acquisition, it surpasses top specification standards, ensuring your operations are expertly monitored and managed by industry leaders.
8. Advanced Computer Connection Operation Recording Software
Our cutting-edge connection software is meticulously optimized for Mattel's line of environmental measuring machines. Users benefit from enhanced operational capability, achieving seamless multi-machine oversight, efficient data extraction, and advanced electronic features that significantly enhance user experience.
Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Explore our premium collection of machinery imported from Germany and Taiwan, featuring the remarkable AMADA AIRS.-255NT Punching system. Our inventory includes versatile carbon oxide and argon welding devices, each exemplifying precision and state-of-the-art technology. Master Autodesk Inventor 3D drawing software for sheet metal design, virtual assembly, and disassembly, elevating the modern manufacturing standard.
2. The exterior shell, constructed from premium galvanized steel, offers unmatched durability. Enhanced with an advanced electrostatic powder spray baking paint, it provides lasting protection and a sleek, sophisticated look.
Three.. Our interior box, crafted with high-grade imported SUS #304 stainless steel, is expertly engineered using comprehensive argon arc welding to prevent air leakage in high-temperature and high-humidity settings. Rounded corners facilitate superior condensate drainage, optimizing operational efficiency.
Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration management system utilizes cutting-edge frequency conversion control, delivering precise and adaptable thermal regulation. Experience unmatched flexibility and performance tailored to your specific needs.
With our variable frequency refrigeration system, even when the power supply frequency is stable at 50HZ, the frequency converter intelligently adjusts the compression speed. It customizes cooling output to meet real-time test chamber demands, dynamically altering compressor frequency as chamber temperatures change, boosting energy efficiency and ensuring rapid cooling for top-tier performance.
Embrace the seamless consistency of our test chamber's variable frequency refrigeration system, maintaining an unwavering temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, optimizing reliability and delivering superior performance.
Unleash the potential of our energy-efficient refrigeration system, harmonized with pioneering energy-saving innovations. Designed to enhance performance while significantly reducing resource consumption, it sets a new benchmark in efficiency.
1. Utilize the advanced capabilities of PID and PWM-driven VRF technology with electronic expansion valves for precise thermal flow control. Achieve unmatched low-temperature energy efficiency through PID + PWM systems that refine refrigerant flow management, ensuring effective operation devoid of auxiliary heating.
Achieve automatic temperature stability with meticulous three-way flow regulation across refrigeration, cold, and heating pipelines. This sophisticated method excels in maintaining optimal performance even under low-temperature conditions, reducing energy usage by 30% and amplifying overall efficiency.
Our groundbreaking system, integrating the prestigious Danish Dan-foss Company's ETS System electronic expansion valve, showcases unparalleled dynamic refrigeration capacity adjustments. It seamlessly adapts to diverse cooling rates, ensuring optimal compressor cooling capacity and elevating efficiency to new heights.
2. Boasting an ingenious dual compressor group design, our advanced technology features automatic start-stop functionality meticulously aligned with load conditions. This innovation not only maximizes efficiency but is brilliantly enabled by our cutting-edge series design.
The sophisticated refrigeration unit employs a binary compound of semi-closed compressors integrated into a fully dense single-stage system. It skillfully adjusts to load demands, ensuring ultimate cooling capacity while extending the compressor's lifespan significantly.
Revolutionary Cold Circuit Technology
Our power distribution layout is meticulously crafted to perfection, strictly following the technical department's blueprints and incorporating globally renowned electrical components. This discerning selection from esteemed brands guarantees unrivaled reliability, placing our systems at the zenith of electrical excellence.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate legendary brands such as Omron, Sch-neider, and Germany Phoenix Terminal block into our avant-garde designs. Each line code is meticulously marked for ease of use, delivering steadfast reliability. We exclusively select the most respected Chinese brands, ensuring extraordinary performance and enduring durability.
Choose the illustrious Pearl River Cable, a brand renowned for its unparalleled wire quality and stellar performance. Our control lines feature a minimum specification of 0.75 Square RV soft copper wire, guaranteeing optimal conductivity. Key load components, including motor compressors, are engineered with precision to meet stringent EC standards. Precisely selected trap diameters adhere to cable groove wiring safety standards, while expertly sealed cable ports prevent frost-induced short circuits, protecting the terminal within the junction box from potential harm.
Each terminal fixing screw is fastidiously secured with a standard fixed torque, ensuring swift and secure connections. This meticulous attention to detail significantly enhances system safety and reliability, effectively mitigating risks such as loose connections and potential fires.
Refrigeration Series Process: A Holistic and Comprehensive Approach
1. Standardization: Navigating the Pathway to Unmatched Excellence
1.1 Our exceptional steel pipe piping process, coupled with rigorous welding standards, underscores our unwavering commitment to excellence and incomparable reliability.
By adhering to standard pipe layouts, we ensure steadfast stability and reliable dependability across our model systems, guaranteeing optimal performance at every instance.
1.2 Using advanced Italian imported pipe bending machinery, we produce seamless steel pipe bends. This state-of-the-art process significantly reduces welding points and minimizes oxide formation during welding, thereby substantially enhancing overall system reliability.
Emphasizing System Reliability as Our Core Objective
Innovative Shockproof Design and Resilient Pipeline Support
2.1 At Meitec, we uphold strict standards for supporting and shockproofing refrigeration copper pipes. By thoroughly evaluating potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping. This robust approach protects against deformation and leakage caused by circular vibration and temperature fluctuations, significantly boosting the refrigeration system's overall reliability.
Reimagining Reliability Across the Entire Refrigeration System
2.2 Cutting-Edge Oxidation-Free Welding Techniques
Understanding the critical importance of pipeline cleanliness for a refrigeration system's efficiency and longevity, Metco implements a standardized charging welding procedure to prevent excessive oxide contamination. This meticulous method ensures peak performance consistently.
Through diligent practices, Metco enhances the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide contamination during welding, thereby maximizing reliability and performance at every stage.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}