Advanced 3c Electronics Vibration Testing System for Device Testing Equipment Analysis
Product Description
Discover the extraordinary capabilities of the Guangdong Humid Testing Chamber, a pinnacle of precision in environmental simulation technology. This cutting-edge chamber is masterfully crafted to accommodate a diverse range of high and low-temperature tests for various electrical components, products, parts, and materials. Whether your testing needs encompass constant, gradient, or rapid temperature fluctuations, or wet heat evaluations, MENTEK's sophisticated chambers are engineered to surpass the esteemed Chinese national standards T10586-2006 and T10592-2008. Trust in a reliability and performance level that sets new industry benchmarks.
| M-series vibration testing system |
| Technical parameters of 1-ton vibration table body |
| Sinusoidal thrust |
1000kgf |
N×M
Allowable partial load moment |
>390 |
| Random thrust |
1000kgf |
Equivalent mass of moving parts |
10kg |
(6ms)
Impact thrust |
2000kgf |
Load connection point |
17 |
| Frequency Range |
DC-4,000Hz |
Countertop screw size (standard) |
M10 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*100mm;8*200mm |
| Impact displacement |
51mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
300kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
240mm |
(L×W×H)
Size (no packaging) |
1061mm×750mm×844mm |
| First order resonant frequency |
3600Hz |
Shaking table weight (no package) |
960kg |
|
| Technical parameters of power amplifier |
Technical parameters of fan |
| Maximum output power |
15KVA |
Fan power |
4KW |
| Signal to noise ratio |
>65dB |
Air volume |
0.38m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.048kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
125mm |
| System protection |
Featuring multiple performance protections |
(L×W×H)
Size (no packaging) |
590mm×764mm×1280mm |
(L×W×H)
Size (no packaging) |
550mm×800mm×2070mm |
Weight (no packaging) |
150kg |
| Amplifier weight (without packaging) |
420kg |
|
|
| System working environment requirements |
Purchase configuration |
| temperature |
0-40ºC |
sliding table |
Vertical expansion of the table |
| humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3 phase AC,380V±10%,50Hz,26KAV |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
|
Note:
1. The chamber's precise external dimensions are dictated by the specific heating and cooling rates applied.
2. Featuring an advanced water cooling system, this chamber maintains optimal performance with a water temperature range of 10~28 ºC and a pressure of 0.1~0.3Mpa.
3. For unmatched versatility, the chamber can be augmented with enhanced dampness and heat functionalities.
4. Tailor your testing with the optional dry air blowing system to suit customized requirements.
5. Rapid cooling is within reach with the optional liquid nitrogen function, achieving a remarkable 30 ºC/min.
6. While standard loads are provided, the chamber can be custom-designed to meet specific customer needs.
The equipment meets the following testing standards
Our state-of-the-art testing equipment strictly conforms to a comprehensive suite of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and National Standard/T2423.4-2008 for Change, Damp Heat. It also aligns with China National Standard/T2423.34-2012 Test Z/AnnoDominique, ensuring unparalleled support for a wide range of temperature and humidity conditions with its impressive performance capabilities.
Structure of the testing chamber
The testing chamber boasts an outer shell constructed from high-quality galvanized color steel plate, offering remarkable durability and protection.
Inside, each chamber is lined with SUS304 stainless steel plates and equipped with adaptable hanging hole strips for versatile configurations. The test track frame is insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. High-quality electric wood chicken glass fiber board frames seamlessly connect the inner and outer box doors, providing superior low-temperature insulation. The dual-channel silicone foam door sealing strip excels in temperature resistance.
Experimental space air circulation:
Employing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant aluminum multi-blade wind turbines, powered by motors. These turbines efficiently circulate air via upper louvers and return it from the bottom, ensuring a temperature uniformity of less than 2 ºC across an exceptional range of -70~100 ºC, assessed at an international standard of 10 points.
Controller operating system
The system features a pioneering low-power (8W) temperature and humidity control device, delivering exceptional precision with a temperature control accuracy of ±3 ºC.
1. High resolution screen:
Immerse yourself in vivid detail with a 7-inch TET true-color LCD resistive touch screen, providing an impressive resolution of up to 800 * 480 for crystal-clear visibility.
2. High program capacity:
Boasting vast memory capabilities, this system can store up to 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, facilitates 10 program linking capabilities, and features real-time temperature curve displays for seamless queries and analysis.
3. High data storage capacity:
Effortlessly carry over historical data from up to 300 days with ease by directly uploading via hard disk or network cable to your computer. Alternatively, seamlessly load it into the controller for uninterrupted access and management.
4. Seamless Connectivity:
Stay in complete command with our cutting-edge controller, equipped with LAN standard Ethernet communication for streamlined operation. Effortlessly manage up to 16 devices from a single software platform. The outflow interface guarantees seamless integration into local networks, empowering you with remote program control, real-time monitoring, and hurdle-free access to historical data with the utmost simplicity.
Heating and Moisture Control System
Experience unparalleled heating efficiency with our innovative bare wire nickel-chromium alloy electric heating tubes, meticulously crafted for low thermal inertia and exact temperature control. These tubes significantly reduce heating overshoot, delivering exceptional precision in temperature management. Paired with cutting-edge power controls, this system promises optimal heating performance specifically tailored to your testing needs.
1. Advanced Humidification System:
Revolutionize your testing ventures with our state-of-the-art humidification technology. Our sophisticated humidification cylinder, utilizing the tried-and-true boiler method, ensures unrivaled moisture uniformity. For those who need rapid, precise control, our water plate surface humidification provides unmatched speed and accuracy, effortlessly removing impurities like scale. Exceptionally effective in low humidity dyeing applications, it offers seamless maintenance. Built from seamless stainless steel, our humidification tube features an insulation resistance exceeding 50M Ω, along with a robust anti-dry burning controller for enhanced safety.
2. Water Efficiency and Energy Conservation Maximized:
Discover our front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for seamless water and power management. Experience easy disassembly and cleaning to maintain precision. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, significantly reduces water usage, championing sustainable operations.
Invest in equipment specifically engineered to endure the most demanding testing environments, ensuring unparalleled reliability and exceptional performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products requiring particular wind conditions, this customizable solution provides both precision and adaptability, guaranteeing optimal performance.
2. Optimal Water Supply System: RO Reverse Osmosis
When precise humidification is crucial, our equipment ensures a continuous supply of pure water through an automated production process, offering utmost convenience and efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For demanding long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is the ultimate solution. It accommodates a wide humidity range down to 10 º C/10% RH or lower, meeting the most exacting requirements.
4. LN.Two/ .LCO.2
We offer top-tier professional products with an expansive range of specifications, sourced directly from renowned manufacturers across Europe and the United States. LN.Two/ .LCO.2
Leverage our solenoid valves and advanced control systems to address your critical testing needs with rapid thermal acceleration and precision temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic testing of significant heat loads in high temperature and humidity settings, our groundbreaking ultrasonic cooling and humidification system is expertly crafted to surmount these challenges. Employ it as an auxiliary component to achieve pinnacle performance.
6. Integrate a Glass Inner Door for Manual Operation Access
Embrace our cutting-edge solution crafted to minimize environmental disturbances during frequent testing or object movement. This design ingeniously incorporates a glass inner door (∧ 125Mm * Ea.), simplifying manual operations while drastically reducing disruptions caused by frequent door openings. Experience enhanced testing fidelity like never before.
7. Seamless Real-Time Test Data Collection and Recording: Capture critical insights effortlessly with our advanced systems.
Introducing our tape recorder, the embodiment of precision and reliability in environments demanding absolute accuracy. It is masterfully designed for the simultaneous recording of multiple temperature metrics, not merely meeting but exceeding the most rigorous standards, ensuring your processes are conducted with unmatched excellence.
8. Sophisticated Computer Connection Operation Recording Software: Elevate your workflow with cutting-edge technology.
Tailored exclusively for Mattel's environmental measuring machine suite, our unparalleled connection software redefines user engagement by delivering superior functionalities. Benefit from flawless multi-machine monitoring, streamlined data retrieval from operational units, and top-tier electronic features that render usability exceptionally intuitive.
State-of-the-Art Structural Technology: Breakthrough advancements for optimized performance.
1. Discover Our Company's Premier Hardware Equipment: Experience the pinnacle of technological advancement.
Dive into our prestigious range of German and Taiwan imported machinery, spotlighting the distinguished AMADA AIRS.-255NT Punching system. Featuring carbon oxide and argon welding machines, each model epitomizes precision and innovation. Master an array of Autodesk Inventor 3D drawing software applications, setting unprecedented standards in modern manufacturing excellence.
2. Encased in premium galvanized steel, the shell is renowned for its remarkable durability. Enhanced with a sophisticated electrostatic powder spray baking paint finish, it offers enduring protection and a refined aesthetic.
Three.. Meticulously engineered with imported SUS #304 stainless steel, the inner box employs a full argon arc welding technique to effectively thwart high-temperature and high-humidity air leakage. Its rounded corners exemplify efficient condensate drainage, elevating overall efficacy.
Revolutionary Refrigeration System Technology: A leap forward in cooling precision.
Our refrigeration system boasts 3D-optimized management and advanced frequency conversion control technology, delivering precise and adaptable thermal regulation for unparalleled flexibility.
Within our variable frequency refrigeration system, the frequency converter ingeniously modulates compression speed, even with a consistent power supply frequency of 50HZ. It meticulously adjusts cooling output in response to real-time test chamber loads and dynamically adapts compressor frequency with chamber temperature variations, enhancing energy efficiency and ensuring swift, exceptional cooling.
Experience unmatched stability with our test chamber's variable frequency refrigeration system, consistently maintaining a meticulously regulated temperature environment. This system ensures balanced suction and exhaust pressures, optimizing operational consistency for exemplary performance.
Explore the fusion of energy-efficient refrigeration system technology and trailblazing energy-saving innovations, meticulously crafted to magnify performance while minimizing resource consumption.
1. Harness the power of PID and PWM-driven VRF technology, accentuated by electronic expansion valves for exquisite thermal flow control. Achieve exceptional low-temperature energy efficiency as PID + PWM systems refine refrigerant flow regulation, ensuring optimal operations sans auxiliary heating.
Through meticulous three-way flow adjustment of refrigeration, cold side, and heating side pipelines, achieve automatic temperature consistency. This method excels in maintaining peak performance in low-temperature environments, reducing energy consumption by 30% and boosting overall efficiency.
Our cutting-edge technology, employing the Danish Dan-foss Company's ETS System electronic expansion valve, offers dynamic refrigeration capacity adjustments. It tailors to varying cooling rates, optimizing compressor cooling capacity for superior efficiency.
2. Employing a dual compressor group design technology, our automatic start-stop functionality aligns seamlessly with load conditions to optimize efficiency, brought to life through our advanced series design.
The refrigeration unit integrates a sophisticated binary compound of semi-closed compressors and a fully dense single-stage system. It intelligently adapts to load demands, ensuring optimal cooling capacity and extending compressor longevity.
Innovative Cold Circuit Technology: Redefining cooling excellence with state-of-the-art solutions.
The power distribution layout is executed with meticulous precision according to technical department blueprints, employing globally acclaimed electrical component brands for unparalleled reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we take immense pride in integrating esteemed brands like Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is distinctly marked, ensuring simplicity and reliability in usage. We meticulously select only the most reputable Chinese brands, guaranteeing superior performance and unparalleled durability.
Selecting the distinguished Pearl River Cable as our trusted brand assures unmatched wire quality and extraordinary performance. Our control lines boast a minimum standard of 0.75 Square RV soft copper wire, renowned for its robust and efficient conductivity. Key load components, such as motor compressors, are crafted with meticulous precision to meet stringent EC standards. Trap diameters are carefully chosen to comply with cable groove wiring safety and current standards, while the machine's cable port is expertly sealed to prevent frost-induced short circuits, safeguarding the junction box's terminal from any potential damage.
Every terminal fixing screw is meticulously connected using a precise fixed torque, ensuring secure and rapid connections. This careful attention to detail minimizes risks such as loose fires, significantly enhancing both safety and reliability.
Refrigeration Series Process: A Comprehensive and Meticulous Approach
1. Standardization: Paving the Way to Superior Excellence
1.1 Our exceptional steel pipe piping process, coupled with rigorous welding standards, showcases our unwavering dedication to excellence and unmatched reliability.
By strictly adhering to standardized pipe layouts, we ensure the consistent stability and reliable performance of our model systems.
1.2 Utilizing cutting-edge Italian imported pipe bending machinery, we achieve flawless steel pipe bends. This advanced process reduces the need for welding points and minimizes oxide generation within the tubes during welding, thereby bolstering overall system reliability.
Prioritizing System Reliability Above All Else
Innovative Shockproof Design and Resilient Pipeline Support
2.1 At Meitec, we uphold stringent standards for the support and shock prevention of refrigeration copper pipes. By thoroughly assessing potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping. This prevents deformation and leakage caused by circular vibration and temperature fluctuations, thereby elevating the overall reliability of the refrigeration system.
Enhancing Reliability Across the Entire Refrigeration System
2.2 State-of-the-Art Oxidation-Free Welding Process
It is widely recognized that the cleanliness of a refrigeration system's pipeline is crucial to its efficiency and longevity. Metco employs a standardized charging welding procedure to prevent excessive oxide contamination during the welding process, thereby ensuring optimal performance.
Through rigorous practices, Metco enhances the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide pollution during welding, thereby maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}