High Precision Battery Pack Impact Testing Table for Accurate Evaluation Tool
Product Description
Step confidently into a new era of precision testing with the groundbreaking High Performance Temperature Humidity Chamber from MENTEK. This exceptional and versatile marvel is meticulously crafted for superior high and low-temperature testing, designed to cater to a diverse spectrum of electrical products, components, and materials. The chamber stands out with its environmental simulation reliability testing, covering constant gradient, sudden mutation, and wet heat assessments, offering all-encompassing solutions for even the most demanding testing requirements. Developed with pride by MENTEK, these chambers strictly comply with Chinese national standards/T10586-2006 and T10592-2008, guaranteeing unmatched accuracy and dependability.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Each dimension can be expertly tailored to perfectly fit your specific requirements, ensuring every need is met with precision.
Relevant standard test requirements
Our equipment is aligned with the prestigious standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014, ensuring top-tier compliance and performance.
Refer to section 4.5 for the sample. Following the prescribed test method, execute the acceleration impact test once fully charged. This test is performed sequentially in three mutually perpendicular directions. For a comprehensive understanding, refer to the detailed testing methodology in section 7.4.
Upon the conclusion of the experiment, conduct a full discharge and charging cycle using the method outlined in section 4.5. The sample must demonstrate no ignition, explosion, or leakage, ensuring supreme safety and reliability.
Our cutting-edge equipment complies with the following rigorous testing standards:
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Combination temperature and humidity tests within the equipment's performance range.
Structure of the Testing Chamber
Crafted with precision, the testing chamber boasts a robust exterior made from galvanized color steel plates, engineered to deliver exceptional durability and an extended lifespan.
The interiors are designed with meticulous attention to detail, featuring SUS304 stainless steel and side-mounted adjustable hanging hole strips, alongside a versatile test track frame. The structure is fortified with at least 10 cm multi-layered rigid polyurethane foam and glass wool, offering superior thermal insulation. The interface between the inner and outer doors is constructed with high-quality electric wood chicken glass fiber board frames, ensuring optimal low-temperature insulation. The sealing strip of the door is crafted from double-channel series silicone foam, providing remarkable resistance across a wide temperature range.
Advanced Experimental Space Air Circulation:
Our sophisticated air supply system features multi-blade aluminum wind turbines, expertly designed to withstand extreme temperatures. Driven by robust motors, these turbines efficiently channel air to the upper louvers, with a return flow from the bottom, ensuring an outstanding uniformity of less than 2 º C throughout the extensive range of -70~100 º C, setting a global benchmark for precision and reliability.
Controller Operating System
Harness the capabilities of a state-of-the-art low-power (8W) temperature and humidity control device, achieving unrivaled temperature control precision of up to ± 3 º C, ensuring consistent and reliable performance at all times.
1. High Resolution Screen:
Immerse yourself in sharp, vibrant visuals on our 7-inch TET true color LCD resistive touch screen, boasting an impressive resolution of 800 * 480, offering a viewing experience like no other.
2. High Program Capacity:
With a vast memory capacity, our system can store an impressive 1000 programs/1000 segments, 999 total loops, and 999 partial loops. It offers 10 sets of program linking functions, complete with real-time temperature curve displays for quick and efficient query access, ensuring seamless operations and management.
3. High Data Storage Capacity:
Effortlessly manage up to 300 days' worth of historical data with our storage operation mode. Data can be directly uploaded to a hard disk or network cable, or fully integrated into the controller, ensuring smooth and seamless data management.
4. Easy Connection:
Step into the cutting-edge realm of communication with our revolutionary controller, masterfully crafted to transform connectivity. Outfitted with LAN standard Ethernet communication, it effortlessly harmonizes with up to 16 devices, all through a singular, intuitive software platform. Elevate your operations with seamless integration into regional networks via the machine's outflow interface, unlocking the boundless potential of remote program control. Immerse yourself in real-time monitoring and historical curve playback, providing you with unrivaled oversight and control, all at your fingertips.
Heating and Humidification System
Experience the pinnacle of precision with our expertly engineered system, crafted from bare wire nickel chromium alloy electric heating tubes. This design redefines performance, offering minimal thermal inertia and negligible heating overshoot, ensuring your system operates at peak efficiency with unmatched precision in fluctuation control.
1. Humidifier:
Discover the epitome of precision and consistency with our advanced humidification system. The boiler-based humidification cylinder guarantees unmatched uniformity, while the surface humidification method provides swift operation and superior control precision. This state-of-the-art innovation eliminates impurities like scale within the chamber, boasting exceptional dyeing capability and impressive performance in low humidity conditions. A stainless steel shell with insulation resistance over 50M Ω ensures easy maintenance. The advanced anti-dry burning controller enhances safety, making this system a paragon of engineering excellence.
2. Optimizing Water Usage and Energy Efficiency:
Experience ultimate convenience with our 25L high-capacity water tank, featuring a front-mounted quick connection system for simplified water and electricity connections, allowing easy disassembly and cleaning. Achieve precise dehumidification across three distinct humidity zones, significantly reducing water usage while adhering to stringent national standards for high temperature and humidity conditions up to 85 ºC and 85% RH. Its closed design, with deactivated point cooling and dehumidification systems, drastically curtails water consumption, setting a new efficiency benchmark.
Invest in exceptional equipment, meticulously designed to excel under the most demanding testing conditions, guaranteeing unmatched performance and reliability.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When precise wind speed specifications are essential for your product, our bespoke solutions are the perfect choice. Custom-designed to meet your unique requirements with precise accuracy, ensuring perfect alignment with your operational needs.
2. Select the Right Water Supply System: RO Reverse Osmosis
Utilize the purity of water for your humidification needs with our advanced automatic water production system. This cutting-edge equipment guarantees a continuous supply of pure water, saving you valuable time and providing unmatched convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
For operations requiring sustained low-temperature and low humidity testing, our advanced cellular chemical dehumidification system is indispensable. It achieves an impressive humidity range of up to 10 ºC/10% RH or even lower, smoothly meeting your most stringent requirements.
4. LN.Two/ .LCO.2
Explore our meticulously curated collection of professional products, imported from Europe and the United States, available in a comprehensive range of complete specifications tailored to meet your exact needs. LN.Two/ .LCO.2
Our cutting-edge solenoid valves and integrated control systems are engineered to meet your rapid testing needs, designed for swift acceleration and efficient temperature regulation, ensuring your testing processes are both fast and precise.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Designed for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system meets these rigorous demands with precision and reliability. This essential auxiliary solution ensures your operations remain efficient and effective.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Unleash seamless operation and mobility with our cutting-edge manual operation feature, accessible through a durable glass inner door (∧ 125Mm * Ea.). This avant-garde design is crafted to significantly reduce the environmental impact caused by opening the chamber door, thereby ensuring unparalleled operational efficiency and precision.
7. Advanced Real-Time Data Acquisition Recorder
Our advanced recorders are thoughtfully designed to meet rigorous industry standards, delivering unmatched accuracy in capturing synchronous temperature readings from both the testing environment and the test object. With an integrated high-performance tape recorder, you can achieve these precise recording needs with exceptional precision, setting new standards in the industry.
8. Cutting-Edge Computer Connection and Operation Recording Software
2fcf7e28
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}